How do fix error state in Hp Printer?

      No Comments on How do fix error state in Hp Printer?

How do fix error state in Hp Printer:-

 

 

If your hp printer’s status displays ” hp Printer in error state,” there may be a problem with the printer itself.
Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn’t open and the paper isn’t jammed.

I understand when you print from your printer you are getting error printing message.

 

Don’t worry I’ll try to help you out.

 

Did you make any changes to your printer?

 

Are you able to make a copy from your printer?

 

Is your printer connected by wired or wireless connection?

 

As you mentioned when you print from your printer you are getting error printing message.

 

Please provide the operating system you are running on your PC to assist you better.

 

Try the steps recommended below.

 

1. Press the Power button on the printer to turn it off.

2. Disconnect the power cord from the rear of the printer.

3. Disconnect the power cord from the wireless router.

4. Turn off the computer.

5. Wait for 30 seconds.

6. Reconnect the power cord to the wireless router.

7. Wait for 30 seconds, or until the router is fully on and ready

8. Turn the computer back on.

9. Wait for the computer to reload

10. Reconnect the power cord to the rear of the printer.

11. Turn the printer back on.

 

Try printing a Print a Print Quality Diagnostic Page.

 

Print a Print Quality Diagnostic Page in Windows 10, Windows 8, Windows 7, or Windows Vista.
Load U.S. Letter or A4 size, unused, plain paper into the input tray.
Press the Power button to turn on the printer, if it is not already on.
Open or search for the HP folder in your list of installed software programs, click the folder for your printer, and then click the name of your printer.
The HP Printer Assistant software opens.
On the HP Printer Assistant window, click Maintain Your Printer.
Click the Device Reports tab, and then click Print Diagnostic Information ().
Also, Try uninstalling the printer drivers from root level on your PC and install the full feature printer software. (Windows Only)

 

In Windows, search for and open Programs and Features.

Select your HP printer.

Select Uninstall.

In Windows, search for and open Devices and Printers.

In the Devices and Printers window look for your HP Printer. If you see it listed, right-click on it and choose “Delete” or “Remove Device.”

Open up the run command with the “Windows Key + R” key combo.

Type printui.exe /s and click OK.

Click on Drivers tab.

Look for HP Printer driver. If you see it click on it and click remove at the bottom.

Select OK.

Select Apply and OK on the Print Server Properties windows.

Close Devices and Printers.

 

Update the full feature printer software using this link: https://hp.care/2D2CCtS

 

If the issue still persists after trying out the steps, try running HP print and scan doctor on your PC.

 

Refer this article to know more information about using HP print and scan doctor.

 

 

If the solution provided worked for you, please mark accepted solution for this post.

 

 

 

 

Step 1

Ensure that the HP printer cables are properly connected. If in doubt, turn off the printer, unplug it and disconnect all of the printer cables. Plug it back in and reconnect the cables. Turn the printer back on again to see if the error has cleared.

Step 2

Check the HP printer cartridges and print heads to ensure that they’re installed properly. Also see if the printer cartridges are empty. If the ink cartridges have sufficient ink, reinstall the cartridges and the print heads. If an ink cartridges is empty, replace it with a new one.

Step 3

Make sure that the HP printer’s software is properly installed. If the device does not respond when you try to print or the printer software won’t initialize, uninstall and reinstall the HP printer software.

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *